Winona Van Norman Logo
Need help? We're here to answer your question!
Contact Support


The WVN-500 hone is constructed in two pieces. For instance, it consists of the honing section and the work-holding section. The hone section is made from welded structural tubing with excellent rigidity. On the top of this section there is a base that supports the honing head, and displacement guides that move the hone head back and forth.

Product Info


The hone head inline movement is driven electronically. For example, the hone head rotation turns through a variable reducing motor that allows the hone head to cover the 1.58” – 32” honing range. Further, the R.P.M change is performed manually. Additionally, the hone head expansion is performed electronically by a motor and reducer directly from the control panel. There are two steady-rests, one of which is fixed at the end of the table, and the other that is adjustable to help support the work piece


Maximum Movement of the Head252 in
Maximum Length for Honing240 in
Minimum Diameter for Honing1.58 in
Maximum Diameter for Honing32 in
Maximum Diameter of the Work Piece40 in
Maximum Diameter of Work Piece on Table52 in
Maximum Weight Admitted on Table10,000 lbs
Hone Head Rotation13-350 R.P.M.
Variable Drive Velocity18'-98' per minute
Drive Motor10 HP
Rotation Motor Expansion Motor Pump Motor7.5 HP
Pump Volume1 HP
Voltage3/4 HP
Hand Control Voltage16 Gal/Min
Machine Dimensions230 Volt, 3 Phase, 60 Hz
Electrical Control Box Dimensions120 VAC
Filter Box Dimensions59 ft x 3ft-3 in x 6 ft-7 in
32 in x 20 in x 40 in
40 in x 24 in x 20 in
Oil Deposit Reservoir 50 Gal
Machine Weight7,875 Lbs
Minimum Space Required62 ft x 10 ft


The WVN-500 is known for its quick and easy setup and operation. It also features a touch screen operation panel, axial stroke and speed regulated from panel, and fast taper correction. Further, this is a low noise honing machine with a high axial and rotation torque to decrease time. Its high precision electro-mechanical expansion system is driver controlled and comes with an easy tube clamping device.

Standard Tooling

The control box is located in the center of the machine, in which the height and orientation makes it easy to access. The machine runs on an automatic preset timer cycle. This machine includes custom software tailored for your application. Standard equipment included in the WVN-500 are filters and honing oil.